Address

PO Box 677, 1555 255th St.
Sheffield, IA USA 50475-0677

Sukup Non-Stiffened bins were designed with the operator in mind and it shows in the many features standard on every Sukup Bin. From our patented anchor brackets to our extra-strong roofs; quality, strength and innovation have made Sukup Bins a top choice across the countryside and Sukup the world's fastest growing bin company.

Standard Features

  • Covered by a 5-year limited warranty

Sukup Farm Bins (B)

  • 15'-48' diameter
  • 3-10 rings tall
  • Bins up to 6 rings tall are designed for general drying and storage which may be equipped with up to a 3 down auger stirring device
  • Bins 7 -10 rings tall are designed for storage and aeration only, NOT DRYING

Sukup Farm Heavy Gauge Drying Bins (BD)

  • 18' to 48' diameter
  • 5 or 6 rings tall
  • Bins are designed for general drying, wet holding/working and storage which may be equipped with up to a 5 down auger stirring device with a center unload continuous flow system or recirculating devices

Sidewall Features

  • 4" wide corrugation, 44" tall sidewall sheets
  • Bolts are SAE Grade 8.0 for added strength with JS1000® coating for exceptional corrosion protection
  • 70 ksi tensile strength steel
  • Patented 22" anchor brackets provide extra support for the plenum area and are designed to be used with either rolled flange or bolt-on base angle bottom sheet (U.S. Patent # 6,941,712)
  • 3/8" bolts on all sidewall rings

Door Features

  • Patent Pending catch is mounted to the inner door panel handles providing the catches for the outer door latches
  • Safety latch assures the inner panels are closed and secured when properly engaged
  • Hammerhead™ door latch (U.S. Patent #8,123,260) allows single-handed operation and ensures easy opening of doors
  • Inside door panels open flat against bin wall
  • 44" and 66" doors available
  • Door step included as standard equipment

Roof Features

  • 15'-48' standard roof peak load rating is 5,000 lbs, evenly distributed on peak ring as pure vertical load with uniformly distributed roof snow load calculated from 40 psf ground snow zone or 105 mph wind zone as defined by ASCE7-10 Code
  • Rigidized roof panel with 3" ribs that serve as rafters, strengthening the roof sheets
  • Sukup's standard double-tab roof clips support roof sheets every 9 3/8" at the eave
  • Roof rings are standard on Sukup bins 18' and larger. Exclusive, roof ring clips (U.S. Patent #7,654,048) ensure that roof rings stay in place for years to come.
  • 20" x 35.5" oval manhole opening is a comfortable fit for most operators
  • Manhole cover is held securely in place by special latches; when open, the lid lays flat against the roof, eliminating the mess of water and soggy bees wings that can accumulate
  • 38" peak opening provides approximately 8 ft2 of air exhaust area
  • Peak lid cover is mounted on steel rods to allow it to slide open and closed and prevent it from blowing around on windy days
  • 5/16" bolts and flange nuts used for all roof connections

General Options

  • Top ring punched for stirring track (up to 6 rings tall)
  • Bottom bin sheets may be pre-punched for Sukup floor flashing
  • Rolled flange or bolt-on base angle
  • Transition openings can be pre-cut for Sukup Fans at a nominal charge

Sidewall Options

  • Inside & outside ladder packages
  • Sidewall stairs

Door Options

  • 8-10 ring tall bins can be equipped with an optional 66" door

Roof Options

  • 42' & 48' bins have an 8000 lb. roof option (5000 lb. roof standard)
  • Continuous Eave Clip provides an even stronger roof to sidewall connection than our standard double-tab roof clips
  • Exclusive 18" Poly Roof Vents are virtually indestructible with debris deflectors to prevent dirt, fines and other trash from collecting behind the vent
  • 18" roof vent cut-outs feature a 1-1/8" lip around the opening to prevent leakage
  • 60" octagonal diamond deck lid
  • Ground operated lid opener
  • Temperature cable mounting brackets

*Sukup roof load ratings are based on a peak load evenly distributed on peak ring as pure vertical peak load with uniformly distributed roof snow load calculated from 40 psf ground snow zone or 105 mph wind zone as defined by ASCE7-10 Code.

Product Features
  • All Bins are manufactured under Sukup Manufacturing Company’s ISO 9001 Certification Requirements
  • SAE Grade 8.0 Hardware with JS1000® Hour Plating
  • Super Shield® to Provide an Extra Layer of Protection
  • G115 Galvanized Roof Sheets
  • Anchor Brackets Act as Short Stiffeners
Jeff McFall, Elgin Service Center

Venedocia, OH

Quality, Service, and Sense of Community.
ARE YOU READY TO START A PROJECT?
Find Your Dealer
Map picture